John (Jack) F. Booker: Publications

Publications

return to profile

  • Boedo, S., JF Booker. 2016. "Warner-Sommerfeld Impedance and Mobility Maps." ASME Journal of Tribology 138 (3): 034502, 5 pp..
  • JF Booker. 2014. "Mobility/Impedance Methods: A Guide for Application." ASME Journal of Tribology 136 (2): 024501, 8 pp..
  • Boedo, S., JF Booker. 2014. "A Novel Elastic Squeeze Film Total Hip Replacement." ASME Journal of Tribology 136 (1): 011101, 12 pp..
  • Boedo, S., S. A. Coots, JF Booker. 2013. "Swing Phase Lubrication Analysis of a Novel Artificial Hip Joint." Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, CA, United States, November.
  • JF Booker, S. Boedo, D. Bonneau. 2010. "Conformal EHL analysis for engine bearing design: a brief review." Proc. IMechE Part C: Journal of Mechanical Engineering Science 224 (12): 2648-2653.
  • JF Booker. 2014. "Foreword." In Volume 1: Hydrodynamic Bearings , 224. New York: Wiley.
  • Boedo, S., JF Booker. 2009. "Dynamics of offset journal bearings - revisited." Proc. IMechE Part J: Journal of Engineering Tribology 223(3): 359-369, 606-607.
  • JF Booker, S. Boedo. 2007. "Spherical vs. cylindrical engine bearings (Extended Abstract)." Paper presented at Proc. STLE/ASME International Joint Tribology Conference, IJTC2007, San Diego, CA, United States, October (4th Quarter/Autumn).
  • JF Booker, S. Boedo. 2006. "Unsteady EHL: 'nodal' versus 'modal' formulations." Paper presented at Proc. IUTAM Symposium on Elastohydrodynamics and Microelastohydrodynamics, Dordrecht, Netherlands
  • Boedo, S., JF Booker. 2005. "A mode-based elastohydrodynamic lubrication model for Gas Journal Bearings." ASME Journal of Tribology 127 (2): 306-314.
  • JF Booker. 2005. "Unsteady EHL: An inverse hydrodynamic formulation." In Life Cycle Tribology (Proc. 31st Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, M. Priest, G. Dalmaz, & A.A. Lubrecht , 65-72. Amsterdam, Netherlands: Elsevier.
  • Boedo, S., JF Booker. 2004. "Classical bearing misalignment and edge loading: A numerical study of limiting cases." ASME Journal of Tribology 126 (3): 535-541.
  • Olson, E. G., JF Booker. 2001. "EHD analysis with distributed structural inertia." ASME Journal of Tribology 123 (3): 462-468.
  • Boedo, S., JF Booker. 2001. "Finite element analysis of elastic engine bearing lubrication: Application." Revue Européenne des Eléments Finis 10 (6-7): 725-739.
  • JF Booker, S. Boedo. 2001. "Finite element analysis of elastic engine bearing lubrication: Theory." Revue Européenne des Eléments Finis 10 (6-7): 705-724.
  • Boedo, S., JF Booker. 2000. "A mode-based elastohydrodynamic lubrication model with elastic journal and sleeve." ASME Journal of Tribology 122 (1): 94-102.
  • Boedo, S., JF Booker. 1997. "Surface roughness and structural inertia in a mode-based mass-conserving elastohydrodynamic lubrication model." ASME Journal of Tribology 119 (3): 449-455.
  • Olson, E. G., JF Booker. 1997. "A finite element treatment of hydrodynamically lubricated journal bearings with structural inertia and elasticity." In Elastohydrodynamics - Fundamentals and Applications of Lubrication and Traction (Proceedings 23rd Leeds-Lyon Symposium on Tribology) , edited by D. Dowson et al. , 661-673. Amsterdam, Netherlands: Elsevier.
  • Boedo, S., JF Booker. 1997. "Mode stiffness variation in elastohydrodynamic bearing design." In Elastohydrodynamics - Fundamentals and Applications of Lubrication and Traction (Proceedings 23rd Leeds-Lyon Symposium on Tribology) , edited by D. Dowson et al. , 685-697, 740-741. Amsterdam, Netherlands: Elsevier.
  • Boedo, S., JF Booker. 1996. "Body force and surface roughness effects in a mass-conserving mode-based elastohydrodynamic lubrication model." Paper presented at Proc. Japan International Tribology Conference, Yokohama, Japan, August.
  • Kothari, M., D. L. Bartel, JF Booker. 1996. "Surface geometry of retrieved McKee-Farrar total hip replacements." Clinical orthopaedics and related research (329S): S141-S147.
  • Boedo, S., JF Booker. 1995. "Cavitation in normal separation of square and circular plates." ASME Journal of Tribology 117 (3): 403-410.
  • Kothari, M., JF Booker, D. L. Bartel. 1995. "Analysis of artificial hip joints as spherical bearings." In Lubricants and Lubrication (Proceedings 21st Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, C.M. Taylor, T.H.C. Childs, & G. Dalmaz , 93-98, 671-672. Amsterdam, Netherlands: Elsevier.
  • Boedo, S., JF Booker, M. J. Wilkie. 1995. "A mass conserving modal analysis for elastohydrodynamic lubrication." In Lubricants and Lubrication (Proceedings 21st Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, C.M. Taylor, T.H.C. Childs, & G. Dalmaz , 513-523. Amsterdam, Netherlands: Elsevier.
  • Kumar, A., JF Booker. 1994. "A mass and energy conserving finite element lubrication algorithm." ASME Journal of Tribology 116 (4):667-671.
  • Kumar, A., JF Booker. 1991. "A finite element cavitation algorithm." ASME Journal of Tribology 113 (2): 276-286.
  • Kumar, A., JF Booker. 1991. "A finite element cavitation algorithm: application/validation." ASME Journal of Tribology 113 (2): 255-261.
  • Boedo, S., JF Booker. 1991. "Feed pressure flow in connecting rod bearings." In Vehicle Tribology (Proceedings 17th Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, C.M. Taylor, & M.M. Godet , 55-62. Amsterdam, Netherlands: Elsevier.
  • JF Booker, A. Kumar. 1991. "Mass-conservative cavitation analysis for engine bearings." In Vehicle Tribology (Proceedings 17th Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, C.M. Taylor, & M.M. Godet. Amsterdam, Netherlands: Elsevier.
  • Kumar, A., P. K. Goenka, JF Booker. 1990. "Modal analysis of elastohydrodynamic lubrication: a connecting rod application." ASME Journal of Tribology 112 (3): 524-534.
  • Kumar, A., JF Booker. 1990. "Cavitation and thermal effects in journal bearing applications." Paper presented at Proc. Japan International Tribology Conference, Nagoya, Japan
  • JF Booker. 1989. "Basic equations for fluid films with variable properties." ASME Journal of Tribology 111 (3): 475-483.
  • Kumar, A., JF Booker, P. K. Goenka. 1989. "Dynamically loaded journal bearings: a modal approach to EHL design analysis." In Tribological Design of Machine Elements (Proceedings 15th Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, C.M. Taylor, M.M. Godet, & D. Berthe , 305-315, 508-210. Amsterdam, Netherlands: Elsevier.
  • JF Booker, S. Boedo. 1989. "Transient dynamics of engine bearing systems." In Tribological Design of Machine Elements (Proceedings 15th Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, C.M. Taylor, M.M. Godet, & D. Berthe , 323-332. Amsterdam, Netherlands: Elsevier.
  • Martin, F. A., JF Booker, P. M. Lo. 1987. "Power loss in connecting rod bearings." Paper presented at I. Mech. E. International Conference on Tribology: Friction, Lubrication & Wear 50 Years On, London, England, July (3rd Quarter/Summer).
  • LaBouff, G. A., JF Booker. 1985. "Dynamically loaded journal bearings: a finite element treatment for rigid and elastic surfaces." ASME Journal of Tribology 107 (4): 505-515.
  • JF Booker, P. Olikara. 1984. "Dynamics of offset bearings: parametric studies." ASME Journal of Tribology 106 (3): 352-359.
  • JF Booker, S. Govindachar. 1984. "Stability of offset journal bearing systems." In Vibrations in Rotating Machinery (Proceedings, I. Mech. E. Third International Conference on Vibrations in Rotating Machinery) , edited by Anon , 269-275. London, England:Mechanical Engineering Publications, Ltd..
  • JF Booker, C. F. Shu. 1984. "Finite element analysis of transient elasto-hydrodynamic lubrication." In Developments in Numerical and Experimental Methods Applied to Tribology (Proceedings 10th Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, C.M. Taylor, M.M. Godet, & D. Berthe , 157-163. London, England: Butterworths.
  • Welsh, W. A., JF Booker. 1983. "Dynamic analysis of engine bearing systems." In Tribology of Reciprocating Engines (Proceedings 9th Leeds-Lyon Symposium on Tribology) , edited by D. Dowson, C.M. Taylor, M.M. Godet, & D. Berthe , 29-36. London, England:Butterworths.
  • Goenka, P. K., JF Booker. 1983. "Effect of surface ellipticity on dynamically loaded cylindrical bearings." ASME Journal of Lubrication Technology 105 (1): 1-12.
  • JF Booker, P. K. Goenka, H. J. van Leeuwen. 1982. "Dynamic analysis of rocking journal bearings with multiple offset segments." ASME Journal of Lubrication Technology 104 (4): 478-490.
  • JF Booker, A. C. Stickler. 1982. "Bearing load/displacement determination for multi-cylinder reciprocating machinery." Proceedings ASME 2nd International Computer Engineering Conference, San Diego, CA, United States, August.
  • Goenka, P. K., JF Booker. 1980. "Spherical bearings: static and dynamic analysis via the finite element method." ASME Journal of Lubrication Technology 102 (3): 308-319.
  • Rohde, S. M., D. Whicker, JF Booker. 1979. "Elastohydrodynamic squeeze films: effects of viscoelasticity and fluctuating load." ASME Journal of Lubrication Technology 101 (1): 74-80.
  • Eidelberg, B. E., JF Booker. 1976. "Application of finite element methods to lubrication: squeeze films between porous surfaces."ASME Journal of Lubrication Technology, Series F 98 (1): 175-180, 186.
  • JF Booker, K. H. Huebner. 1972. "Application of finite-element methods to lubrication: an engineering approach." ASME Journal of Lubrication Technology, Series F 94 (4): 313-323.
  • Ruhl, R. L., JF Booker. 1972. "A finite element model for distributed parameter rotor systems." ASME Journal of Engineering for Industry, Series B 94 (1): 126-132.
  • JF Booker. 1971. "Dynamically-loaded journal bearings: numerical application of the mobility method." ASME Journal of Lubrication Technology, Series F 93 (1): 168-176.
  • Badgley, R. H., JF Booker. 1970. "Rigid-body rotor dynamics: dynamic unbalance and lubricant temperature changes." ASME Journal of Lubrication Technology, Series F 92 (3): 415.
  • Badgley, R. H., JF Booker. 1969. "Turborotor instability -- effect of initial transients on plane motion." ASME Journal of Lubrication Technology, Series F 91 (4): 625.
  • JF Booker. 1969. "Dynamically-loaded journal bearings: maximum film pressure." ASME Journal of Lubrication Technology, Series F 91(3): 534-543.
  • Martin, F. A., JF Booker. 1967. "Influence of engine inertia forces on minimum film thickness in con-rod big-end bearings."Proceedings I. Mech. E. 1966-67 181 (1): 30/67.
  • JF Booker. 1965. "Dynamically-loaded journal bearings: mobility method of solution." ASME Journal of Basic Engineering, Series D 87(3): 537-546.
  • JF Booker. 1965. "A table of the journal bearing integral." ASME Journal of Basic Engineering, Series D 87 (2): 533-535.